1. The conveyor belt should be kept clean during transportation and storage, avoiding direct sunlight, rain and snow immersion, and preventing contact with substances that affect rubber quality such as acids, alkalis, oils, organic solvents, etc. It should also be kept at a distance of 1 meter from the heating device.

2. During storage, the temperature inside the warehouse should be maintained between -15 ℃ and+40 ℃, and the relative humidity should be maintained between 50-80%.

3. The conveyor belt during storage must be placed in rolls and not folded. During the storage period, it should be flipped once every quarter.

4. The running speed of the conveyor belt should not exceed 5.0 meters per second. When transporting materials with large block size and high wear, and using a fixed plow type unloading device, low speed should be used as much as possible. Exceeding the specified speed will affect the service life of the tape.

5. The relationship between the diameter of the transmission drum of the transport machine and the fabric layer of the conveyor belt, the matching of the transmission drum changing direction drum, and the requirements for the groove angle of the idler should be reasonably selected according to the design regulations of the conveyor.

6. To reduce the impact and wear of materials on the tape, the receiving section of the tape should shorten the distance between the rollers and take buffering measures. To prevent scratching of the tape, the contact parts between the material blocking device, scraper cleaning device, and unloading device and the tape should be made of rubber sheets with suitable hardness, and tape heads with cloth layers should not be used.

7. The following precautions should be taken during the use of conveyor belts:

A、 Avoid the roller being covered by material, which may cause ineffective rotation, and prevent material leakage from getting stuck between the drum and the tape. Pay attention to lubrication of the moving parts, but do not oil the conveyor belt.

B、 Strive to avoid starting with load.

C、 If the tape deviates, timely measures should be taken to correct it.

D、 Local damage to the tape should be repaired promptly to prevent it from expanding.

E、 Avoid the tape being obstructed by racks, pillars, or block materials to prevent breakage and tearing.